How to Clean Your Washing Machine and Dryer

Exactly like your clothing, your washer and drier are things that need regular cleaning, although not that frequently. As time passes, washing machines collect dirt residue that might lead to mold, and dryers accumulate lint which may begin a fire. So clean your washer and drier regularly to keep them fresh. 

How to Wash Your Washing Machine and Dryer

  1. Run a bicycle using baking soda. This will combat musty scents that old soap and fabric softeners leave behind.
  2. Run a different cycle with vinegar. To eliminate musty odors, in addition to soap and cloth deposits, pour two cups of white vinegar right into the machine drum and then operate the hottest and longest cycle. To get additional freshness, then add 10 drops of essential oil, like tea tree or lavender to the mixture. Remove any stains utilizing a paste of baking soda and warm water and a soft sponge.
  3. Wash the rubber seal connected to the washer when you’ve got a front-load washer dryer. It normally hosts mold that’s bad for your health and your own clothes. Clean it with a cotton cloth dipped in vinegar along with your favorite all-purpose cleaner.
  4. Clean the outside machine components. Now it is time to provide your washer, the outside surfaces, in addition to the detergent packs a fantastic clean. If dispensers are removable, then take them out. Use your preferred cleaner and cotton fabric. In case you’ve got a top-load washer, wash the surface of the lid and beneath it. For cracks and cracks, use a shampoo and baking soda if necessary. 
  5. First, remove the filter and then filter it out (based on the drier, you might want to unscrew the filter ). Then, clean the lint that’s built up in the filter trap employing a thin wand attachment on your vacuum cleaner.
  6. Vacuum the dust from the rear panel. Before you do so, be certain that you read the manufacturer’s directions. As soon as you’re sure it is safe to wash out the rear panel, then unscrew the bolts and you’re going to see a lot of lint inside. Vacuum the lint out and utilize a brush for inside hard locations.
  7. Wash the inside drum along with the drier door thoroughly using a sponge and a cleaner, and allow it to dry. First, detach the bronchial duct in the rear of the drier attentively and use your vacuum to remove the dust and lint within the duct. You also wish to check the outside exhaust tube to make sure there is not any lint blocking the port. Eliminate the valve and vacuum cleaner the lint if there’s one.
  8. Wipe the drier. Now it is finally time to clean the outside surfaces of the drier with warm water and an all-purpose cleaner. After this is completed, reattach the rear panel and ducts.

Contact Your Regional PuroClean Office To Get Disaster Restoration Services

For water remediation solutions and fire damage restoration solutions, contact your regional PuroClean Keller office. Our trained technicians use state-of-the-art equipment and methods to mitigate your house harm.