Smoke Alarm Going Off for No Reason? Here’s Why

Smoke alerts are extremely important in keeping you and your family safe in case of family fire. However, they don’t necessarily seem when an actual fire threatens to break out from your property. Though imitation alarms occur often, that doesn’t mean you should dismiss the noise if you don’t smell or see smoke. Smoke detectors can feel hidden fires, for example, electrical ones, before possible. When an alarm sounds, assume there is a flame and follow proper safety precautions. To help you better understand how smoke alarms work, here are the top causes of smoke detector false alarms.

10 motives for smoke detector false alerts

1. Burnt Food on Stovetop

If you don’t oversee the cooker when cooking, then your dinner may produce smoke, which activates the smoke alarm. Sometimes, smoke is not even mandatory — a sign of burnt food could be sufficient to set off the sensor. Also, ensure that your smoke alarm is optimally placed, like in the hallway leading to the kitchen, not at the kitchen.

2. Burnt Toast or Popcorn

Leaving bread in the toaster or popcorn in the microwave for a little too long can happen to the best people. That sends heavy particles into the atmosphere, which your smoke alarm selections up. To prevent this situation in the long run, maintain your smoke detector at a safe distance from these types of devices.

3. Fireplaces

Fireplaces may also bring about smoke detector false alerts. Your fireplace can occasionally send smoke into your house, which sets the alarm off. This isn’t the alarm’s fault, however. Your chimney might not be clean, and the dampers might not be correctly set. Employ a chimney sweep in case your fireplace sends smoke into your home.

4. High Humidity

Smoke alarms don’t always distinguish between smoke particles and moisture content. Therefore, the density of these moisture particles may activate your alert, even if they are water particles. If you have high humidity inside your house, use windows or fans to dissipate the humidity.

5. Steam

Dense water vapor is like humidity in regards to triggering false alarms. If you take a bath or warm water on the stove, smoke sensors can sense the steam and sound the alert. Make sure that you ventilate your bathroom and kitchen properly to prevent this.

6. Insects

Little bugs love dark cracks inside your home, so they may crawl into your smoke detectors, triggering a false alarm. If you don’t understand what triggered an alarm, then open the unit and check for smaller insects. Use pest control sprays around your smoke alarms when bugs were the culprit.

7. Chemical Smells

Painting or using harsh chemicals may also cause smoke detector false alarms. Smoke sensors pick up on those chemical scents quickly. Ventilate places where you paint or use chemicals to prevent the startling noise of your smoke alarm.

8. Dust and Dirt

Dust that comes from activities like remodeling can set off your smoke alarms. To wash your smoke alarm, start it up carefully, and look inside for dirt or dust. Use a vacuum attachment or digital aerosol cleaner to remove dust particles.

9. Low Batteries

When smoke alarm batteries are running or are not properly attached, they generally make small chirping noises. While that is not the noise of smoke detection, it’s a warning sign that you ought to check on your apparatus. Replace batteries twice a year — when daylight saving time begins and finishes.

10. Old Smoke Alarm

Smoke alarms generally have a lifespan of about 10 decades. When they reach the end of their life span, smoke alarms can give off false alarms. If your detector is older than 10 years, replace it with a fresh one right away.

For fire damage recovery, contact your Regional PuroClean office

Remember, smoke alarms are intended to be sensitive. If a sensor sounds like a false alert, it doesn’t mean it’s broken. Their objective is to help you catch a fire before it becomes benign. Install your smoke alarms not overly near, but not too far away either, from possible fire hazards.

In the unfortunate situation in which the smoke detector did not give off an alarm, the smoke probably caused significant soot damage to the house. That smoke and fire damage will have to be handled by professional fire restoration companies. This is where PuroClean comes in. Learn more about our fire damage cleanup services. For fire damage restoration or smoke cleanup, contact PuroClean today.